How to Replace a Saab 9-3 Key
The Saab 9-3 has an impressive deal of appeal for drivers. It offers good visibility and a strong performance engine. It has a very high safety rating.
However, it's important to make sure that you have at the very least two keys that work for your car. If you lose only one key, it can be very costly to buy another one.
How to replace the ignition Key on the Saab 9-3
If your car's keys won't turn in the ignition, you need to replace it. This guide will guide you through how to do it on a Saab 9-3. You'll need a replacement key with a reprogrammable battery and a brand new key-fob cover.
Contrary to earlier models, modern Saab cars have an electronic transponder inside the key-fob instead physical key made of metal to unlock and start the car. The reprogrammable batteries that are in the key-fob will eventually get worn out, and eventually cannot hold any charge. This is especially true if you use the same key for the same lock.
The good part is that the battery can be replaced easily by an experienced locksmith. If you have the right tools, and a little patience you can do it yourself. The first step is to separate the key-fob. Insert flatheads into the slot that is in the middle of your case. The plastic is very thin and easily damaged.
Once the case has been opened, you can create the new key by combining lower part of old key with a transponder and banana. This will ensure the new key is properly paired to your CIM and could make a big difference when replacing the sole key on your Saab 9-3.
How to replace the ignition Key in a Saab 900
Unless you have two keys, you'll have to take off the steering wheel and dashboard to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you can take off all trim pieces and dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert an screwdriver through the hole behind the ignition switch and remove it.
The ignition cylinder has key locks that can stop the vehicle from starting if the key isn't present in the. If the ignition switch of your 900 isn't working properly, check the key to see whether it's in the lock or is stuck in the barrel of the ignition. It's also recommended to rotate your keys frequently and clean them regularly so that one doesn't get bent.
Saab cars differ from other cars in the sense that they don't use traditional metal keys. Instead, the car detects the key fob's electric signals through a special chip embedded in it.
If you lose your only working key fob, the dealer will charge you the most expensive dollar to replace the computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and enable it to accept new keys without the need to replace it. saab 900 key 'll save 50% on the dealer's cost! We call it the SAAB KEY PROGRAM. Learn more about it here!
How to replace the ignition Key on a Saab 9-5
The metal component of a classic Saab key is easy to copy, and it's not a major obstacle against vehicle theft. The electronic portion of the key-fob is equipped with a chip that recognizes the car when the key is put in the ignition switch.
Saab has relied on the technology of this anti-theft device for over 10 years. It's not as good as a physical lock on the door, but it does make stealing your own car significantly harder. This is the reason why every Saab owner should always have an extra key on hand.
Most new Saabs come with two keys from the factory, but you can purchase additional keys at an agent using a handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, which have more modern and advanced features that require a separate key-fob, and work through a different process.
If you lose all keys, the dealer will replace your CIM or TWICE modules and bill you a premium for it. However, we can reprogram the EEPROM in your existing computer and set it up to accept new keys, without replacing the expensive modules.
How to replace the ignition Key in a Saab XC90
If your SAAB 9-3 key fob begins having issues turning the barrel of the lock It could be the time to replace it. Fortunately, the process is quite simple and doesn't require you to visit a dealer. You can do it at home, using a couple of simple tools.
It is first necessary to prepare the new keys. Before you start, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels and releasing the handbrake. Then, insert the key into the ignition and move it to the on position, which activates the accessories, but it does not start the engine. Repeat this five times, then keep the key in the on position.
Next, you'll need to purchase a new case for the old key fob. They can be found at any auto parts store, and they're generally quite affordable. You can buy them without electronics, based on the model.
To open the case, insert an flathead screwdriver into the slot that is in the middle, and gently work it. When you've split the case, you'll have access to all the internal electronic components. To remove the electronics use a small flathead screwdriver, and try to pry them out gently.